This product is made from recyclable materials. With this feature, it stands out as an eco-friendly product that does not pollute the environment. When the life of your body comes to an end, it also holds scrap value from a financial perspective. Moreover, if you have an insulated body made of aluminum, your vehicle's superstructure will be lightweight. As a result, your vehicle's payload capacity will increase, fuel consumption will decrease, and the lifespan of suspension components and engine will be extended. These are the major differences between CTP & polyester bodies.
THERMOPANEL INSULATED METAL BODY FEATURES
In these types of bodies, all outer walls are made of segmented pressed insulated panels made of aluminum or steel. The panel thickness varies according to the internal thermal value suitable for the product you will be transporting, while the outside air temperature is +38 degrees Celsius.
THERMOPANEL FEATURES
Our superstructures have walls, side walls, and roofs with thicknesses ranging from 30mm to 120mm. The exterior and interior are made of 0.8mm galvanized sheet or 1mm H22 aluminum sheet, while a pressed sandwich panel injected with polyurethane with a density of 42kg/m3 is sandwiched in between. The panel heights are a maximum of 3000mm, and the widths range from 460mm to 1460mm. This panel, which has the same characteristics as an industrial cold storage panel, is used to create a more hygienic environment due to the absence of grooves on its surface. We produce panels in 7 different thicknesses suitable for Izoteknik applications. You can also see their technical versions according to thicknesses in the table below.
Outdoor temperature: +35 ~ +45 degrees Celsius.
| Panel Thickness (mm) | Thermal Conductivity Coefficient | Weight (kg/m2) | Thermal Conductivity Resistance | Internal Thermal Values (°C) |
|---|---|---|---|---|
| 30 | 0.60 | 9.63 | 1.15 | (+16 °C / +12 °C) |
| 40 | 0.51 | 10.03 | 1.55 | (+12 °C / +8 °C) |
| 50 | 0.45 | 10.43 | 1.95 | (+8 °C / +4 °C) |
| 60 | 0.38 | 10.83 | 2.35 | (+4 °C / 0 °C) |
| 80 | 0.29 | 11.63 | 3.15 | (0 °C / -5 °C) |
| 100 | 0.23 | 12.43 | 3.95 | (-5 °C / -12 °C) |
| 120 | 0.19 | 13.23 | 4.75 | (-12 °C / -20 °C) |
All walls are framed with galvanized “U” profile carcasses. The panels are fastened to each other and to the base using MIG/MAG gas welding and steel rivets. After the fixation of the body panels, the corners where all panels intersect (outer edge joints) are insulated with polyurethane sealant.
The names of the parts in the image are as follows:
- Rear door frame (Steel)
- Polyurethane
- Side service door frame
- Roof frame (Aluminum profile)
- Floor interior covering (Plywood)
STANDARD EQUIPMENT:
- Recessed interior lighting fixtures
- All corners and edges are covered with anodized aluminum profiles
- Fixed-type step or sliding-type ladder at the rear of the body
- Foldable bicycle guards on the sides
- Yellow adhesive reflectors on the side skirts
- Installation of traffic reflectors on the rear doors of the body
- Steel or plastic mudguards
- Toolbox
- Door locking spring handles
- Impact-resistant rubber stoppers on the rear skirt of the body
- “D” type door stopper on the side skirts of the body
OPTIONAL EQUIPMENT
- Cooling devices powered by diesel or vehicle engine. The cooling device can be imported or domestic according to your preference.
- Transparent air curtain
- Ventilation window
- Side service door
- Application of logo image on the body surface
- Fixed-type partition system
- Horizontally movable partition system
- Vertically movable “double deck” dual floor system
- Shelf system
- Wind deflector
- Meat transportation hook system
- In meat transport cases, there is a 3-row sliding rail system on the ceiling and a single-row hook arrangement on the sides.
Our THERMOPANEL INSULE bodies are lightweight and have the ability to carry more load with your vehicle.
